spiral wound gasket specification-tombo

Products description:
Major Technical ParameterPower Rating: 0.8kwLine Speed:  96mm/s~290mm/sWork Range: Inside Diameter 10~160mm ...
Click for detail

Products description:
Major Technical ParametalPower Rating: 1.1kwLine Speed:12mm/s~400mm/sWork Range:Inside Diameter 100~100mm...
Click for detail

Products description:
Major Technical Parametal Power Rating 1.1kwLine Speed: 100mm/s~400mm/sWork Range: Inside Diameter 130mm~2500mmThickness <60mm...
Click for detail

Products description:
Material for Gaskets SG-84 Graphite Filler For S.W.G. SG-86 PTFE Filler For S.W.G. SG-80 Asbestos Filler For S.W.G. SG-90 Kinds of "V" Form or plain Hoop for S.W.G. SG-20 Kinds of Tanged Sheet SG-25 Kinds of wire mesh SG-30 Kinds of Metal filter mesh for gas & liquid SG-26 Kinds...
Click for detail

Products description:
Asbestos gasket for low pressure, Manufactured from long fiber white chrysotile asbestors. It has been designed to meet most low temperature and low pressure requirement. Suitable for sealing against steam, gas, gases, hydraulics, oil and non-aggressive media. Asbestos gasket for medium pressures, it can be used for most medium specification applications. Used for sealing again...
Click for detail

Products description:
  ...
Click for detail

Products description:
The products are punched or cut from pure Expanded Graphite Sheet and Reinforced Expanded Graphite Sheet. Depend on its excellent corrosion resistance, high and low temperature resistance, good compression resilient and high intensity. All kinds of circular, complicated geometric gaskets are widely used in pipe, valve, pump, pressure vessel, thermal exchanger, condenser, fluvio...
Click for detail

Products description:
it is made by mica board, and has very good mechanical strength and electric capacbility and suitable for use as sealing materials thickness:0.2-80mm...
Click for detail

Products description:
This product is made from "Kevlar" Armada fiber, Vegetable fiber, and Mineral fiber, compressed and calendered under high temperature and pressure into a sheet form. It eliminates asbestos - Rubber sheet essentially and thoroughly. ...
Click for detail

Products description:
This products are machined or cut from PTFE Rods, pipes and sheets, such as V type gaskets, plain gaskets, ball valve ' s washer, etc. It has several outstanding characteristics such as chemical innersoles, moisture and weather resistance excellent dielectric, etc. Description Temperature Pressure Pure PTFE Cut Gasket  -100~100 100 GIASS FIber 20% f...
Click for detail

Products description:
 ...
Click for detail

Products description:
  ...
Click for detail

Products description:
Corrugated Metallic Gaskets are made from thin sheet metal formed into embossed concentric rings. They may be used with jointing compound or with a cord cemented into the corrugations. These are essentially line contact gaskets with the corrugations providing mechanical support to the compound or cord filling....
Click for detail

Products description:
It is made from Asbestos mill -board, Expanded Graphite, Ceramic etc. filler, cnvered with thin metal jacket, such as stainless steel, carbnn steel, copper etc. special used in sealing spots of thermal exchanger, pressure vessel, etc. NO. Description JBD-8501 Single-jacketed JBD-8502 Wholly-jacketed JBD-8503 Corrugated-jacketed JB...
Click for detail

Products description:
  ...
Click for detail

Products description:
PTFE envelope Gasket consists of Asbestos. Asbestos Rubber, etc. cushion material having exposed surface covered with PTFE envelope. Depends on excellent corrosion resistance and compression resilient. It is widely used in strong alkalis. Cryogenic fluids, oxygen, chlorine gas, and disallow- able polluted medium, etc.   Description PTB-85 (V) V Type,PT...
Click for detail

Products description:
Machined from solid metals in a variety of shapes and are designed for high pressure, high temperature or highly corrosive applications by selecting the most suitable material and shapes.Material: soft iron, low carbon steel, F5. ocr13. SS304 SS321 SS316 SS347   Material  Max.Hardness Max.Temperature LowCarbon Steel(S 10C)  120 530 Stai...
Click for detail

Products description:
This gasket is wound alliteratively by V or W shaped metal hoop and non -metal filler of various kinds of mate- rails selected based on specific working condition. Depend on its excellent compression resilient. It is suitable for sealing spots where the alteration of temperature and pressure are frequent, such as pipe, valve, pump etc. They are avail- able in all standard the f...
Click for detail

Products description:
This gasket is wound alliteratively by V or W shaped metal hoop and non -metal filler of various kinds of mate- rails selected based on specific working condition. Depend on its excellent compression resilient. It is suitable for sealing spots where the alteration of temperature and pressure are frequent, such as pipe, valve, pump etc. They are avail- able in all standa...
Click for detail